Keeping the water from freezing in your rabbit’s bottle in the winter can be a challenge.  As a dedicated rabbit owner we know that you change your pet’s water every day and make sure that your rabbits are healthy and warm.  But sometimes, the weather is harsher and water may freeze while your at work or gone for an extended period of time.

The heated rabbit bottle pictured to the left is the perfect solution because it is thermostatically controlled and only turns on when the water temp goes below 35 degrees.  The bottle can be easily mounted to any hutch or home (see instructions below) and is plastic – so will not break  and endanger your pet.

Instructions for Mounting Heated Water Bottle in Cage
Use the mounting spring to secure the bottle to your cage. Locate the bottle to a height that the animal can easily reach. Do not put bottle where valve is close to the bedding as animals will sometimes attempt to insert bedding into drinking valve. The bottle can be removed for refilling or cleaning by pulling the spring down and ove the bottom of the bottle.

Maintenance of Heated Water Bottle
Clean bottle and lid with warm water and soap. Do not immerse cord or put unit in the dishwasher. If the drinking valve drips, the problem is most likely caused by a piece of sediment getting inside the valve. Press valve stem lightly until sediment is dislodged.

Test for Operation
Unplug and empty water from bottle. Place the bottle in freezer for 30 minutes. Remove from freezer and plug into outlet immediately. After 5 minutes place hand on black cover on back of bottle. If the unit feels warm then it is operating properly.

Note: The cap is vented for proper use of the bottle. The brass valve will not operate if the cap is sealed completely or if a non-vented cap is used.

Limited Warranty: This unit is guaranteed for One (1) Year after original date of purchase or date stamped on the unit against defects due to material and/or company’s workmanship only. The sole obligation shall be to replace the defective unit with a replacement unit. Units should be “checked for proper operation” prior to returning as defective. Units must be returned prepaid. No liability for loss or damage of any nature or kind, whether arising out of or from the use of the product, whether or not defective, is assumed by Farm Innovators, Incorporated.